|
|
|
|
|
|
|
|
|
|
copierpro intern
Joined: 07 Sep 2007 Posts: 125
|
Posted: Thu Nov 11, 2010 5:46 pm Post subject: E06 counter a/b error Xerox 721p |
|
|
any tips or tricks on this one? tried to mask but it went right back to e06 code checked connections to counters a/b they are good. Should I replace counters?
next after replacing counters in book is dc controller board - can I use an 8000 dc controller board in this unit I noticed an eprom on the 721 dc controller that has 721 on it. I need to find a used board I guess.
Any suggestions? |
|
|
|
|
|
|
|
|
|
|
james resident
Joined: 10 Dec 2005 Posts: 249 Location: So Calif |
Posted: Thu Nov 11, 2010 5:54 pm Post subject: |
|
|
It will probably be one of the interlock switches needs to be replaced. Usually it's the door switch I have to replace. |
|
|
|
|
|
|
|
|
|
|
Chazbo doctor
Joined: 05 Jul 2005 Posts: 377
|
Posted: Thu Nov 11, 2010 6:49 pm Post subject: |
|
|
I would replace side door switch and fuser exit door switch. _________________ Ride To Live |
|
|
|
|
|
|
|
|
|
|
copierpro intern
Joined: 07 Sep 2007 Posts: 125
|
Posted: Fri Nov 12, 2010 1:57 pm Post subject: side door r1 or r2 |
|
|
The dumbest question is the one you don't ask do you mean R1 toner door or R2 door for process unit?
I searched the PDF manual for interlock and switch and come up zero and can't locate the part number for either of those doors |
|
|
|
|
|
|
|
|
|
|
james resident
Joined: 10 Dec 2005 Posts: 249 Location: So Calif |
Posted: Fri Nov 12, 2010 3:49 pm Post subject: |
|
|
It's probably the processor door switch.
Xerox pn 110N01058, PL 9.4
Kip pn 9000310151
I'm not sure, only have Kip machines, but I would think the switch is the same in the Xerox and the Kip. |
|
|
|
|
|
|
|
|
|
|
copierpro intern
Joined: 07 Sep 2007 Posts: 125
|
Posted: Fri Nov 12, 2010 3:53 pm Post subject: thanks |
|
|
for the heads up I appreciate it |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|