|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
TomBPI dreaming of medical school
Joined: 16 Aug 2007 Posts: 1
|
Posted: Wed May 19, 2010 4:08 pm Post subject: Odd Magenta issue |
|
|
We've run into a problem and I'm spinning my wheels here with a KC80. The magenta seems to be hazing the entire printon regular bond, with a more noticeable background at the edges of 36" rolls. It has new wires, new drum, new blade, new charge end-blocks, and I have played with the charge wire height till I was sure it fixed it. I leave thinking it's fixed and low and behold, later during the day the issue comes back.
Anyone else seen any issues like this? |
|
|
|
|
|
|
|
|
|
|
Brainz resident
Joined: 28 Oct 2008 Posts: 210 Location: World |
Posted: Thu May 20, 2010 2:06 am Post subject: |
|
|
Had the same problem, and the only way I could correct it was to disable the Auto Density |
|
|
|
|
|
|
|
|
|
|
cmqp2327 medical school grad
Joined: 23 Jan 2009 Posts: 58 Location: US |
Posted: Mon May 24, 2010 9:29 am Post subject: |
|
|
clean and replace the contact grease on the dev unit. this happened to me and this fixed it.
also look at your data display and look at the surface potential for M. if it is not 1-10 volts idle you will need to clean the drum ground and possible need to replace the SP sensor. might need to trace some wires |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|