Knoxtech
dreaming of medical school
Joined: 22 Jan 2008
Posts: 8
Location: Texas
 |
 Posted: Thu Oct 21, 2010 3:40 pm Post subject: uneven cutting in one large set |
  |
|
| Anyone having this same issue? 9000 with approx 2.8 mil sq ft. The difference between what we're having and a couple similar posts here is, that this problem is on one drawer at a time, not between multiple drawers. IE: one job let's say 150 prints, the first 2/3rds are cut proper within 3mm, but the last 1/3rd will be about 1/4 " longer. Haven't had a totally even cut set since the thing was brand new. Won't happen on less than about a 30 drawing set. Any drawer any size. Chain and sprocket, replaced. Reg clutch and big feed clutch and their brakes, all replaced. |
|
