|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
Charlie Brown doctor
Joined: 09 Aug 2005 Posts: 434 Location: Nashville Tennessee |
Posted: Wed Jun 15, 2016 8:22 am Post subject: KIP 7900 |
|
|
Ok Kip Tech I need your thought on this. I got a call from a customer that runs 30K a month this unit had 1,270,000 on it the call was jamming. when I got there it was roll two jamming. the paper will feed and then when it shoud reverse it dose not but go to jam. This is what iI have replace. reverse clutch, set sensor, clock sensor, feed clutch, driver pwb. wiring harness, the sensor just as it leaves the drawer that has the wheel on it I cn't think of it name. I have check to make sure the set sensor and clock sensor switch between high and low as paper passes. I mover the drawer from top postion to low postion and problem stay with the drawer. Been on the hot line with several people. I can't not think of anything I have over look.
_________________ Charlie
I'll keep my Guns, Freedom, & Money ...... YOU CAN KEEP THE "CHANGE!"
I love my grandkids and My Country
I just don't love what my Govt is doing to MY COUNTRY |
|
|
|
|
|
|
|
|
|
|
OCJenks medical school freshman
Joined: 22 Oct 2014 Posts: 12
|
Posted: Wed Jun 15, 2016 6:00 pm Post subject: |
|
|
did you check the drawer (deck) Micro Switch? (#9000310068)
(basically the same as a 5000 which, I had this problem on and that fixed it)also be sure it is engaging, sometimes the drawer is loose and pops out just enough that the switch disengages when it starts to reverse paper. |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Thu Jun 16, 2016 10:05 am Post subject: |
|
|
I have a 7770 that had constant jams in roll 2. I replaced the PH14A sensor and it fixed it. |
|
|
|
|
|
|
|
|
|
|
Charlie Brown doctor
Joined: 09 Aug 2005 Posts: 434 Location: Nashville Tennessee |
Posted: Wed Jun 29, 2016 7:50 am Post subject: |
|
|
OK KM finally came in yesterday and after checking everything I check that got Kip on the phone we went over over everything I done and replace and now the think the problem is the Torque Limiter so now I have the Torque Limiter and Holder3 on order when you think all of this out it could be we will find out _________________ Charlie
I'll keep my Guns, Freedom, & Money ...... YOU CAN KEEP THE "CHANGE!"
I love my grandkids and My Country
I just don't love what my Govt is doing to MY COUNTRY |
|
|
|
|
|
|
|
|
|
|
mark in vegas doctor
Joined: 20 Oct 2010 Posts: 1852 Location: Las Vegas, NV |
Posted: Fri Aug 05, 2016 12:21 pm Post subject: |
|
|
I have a 7900 doing exactly the same thing in roll 3. Let us know if the limiter is at fault. Thanx _________________ Regards,
Mark
RVN 68-69
It's so nice to be insane
No one asks you to explain |
|
|
|
|
|
|
|
|
|
|
Charlie Brown doctor
Joined: 09 Aug 2005 Posts: 434 Location: Nashville Tennessee |
Posted: Mon Aug 08, 2016 8:31 am Post subject: Lost |
|
|
I wish that had help but it did not I still don't know the answer after that here is what happen. We are a Konica Minolta dealer so we buy our KIP though them. Before KM join hands with Kip we use to by our machine though Kip. because we buy our machine though KM we have to go to KM for help. this problem like a lot of problem had them scraching there head they had done two conference with Kip the first call had me replace that part torque limiter . that did not work. so then they did a conference call and again and the Kip rep said you have replace every part in there. the only thing I can think of is one of us come in and looking at the machine. Now I been fighting this problem for over two month. Dealing with KM on it the hole time, so KM was trying to set up a time when they could come in and Kip could come in and meet with me. The customer had been saying after the first month just replace the drawer. while trying to set this up the customer said enough and went to our competition and bought a OCE. right now it at the competition warehouse. I may never see it again. The customer sent a praise letter to my company on me said I gave them the best service and they knew it was not my fault that my hands was tie. _________________ Charlie
I'll keep my Guns, Freedom, & Money ...... YOU CAN KEEP THE "CHANGE!"
I love my grandkids and My Country
I just don't love what my Govt is doing to MY COUNTRY |
|
|
|
|
|
|
|
|
|
|
mark in vegas doctor
Joined: 20 Oct 2010 Posts: 1852 Location: Las Vegas, NV |
Posted: Mon Aug 08, 2016 11:23 am Post subject: |
|
|
Glad the customer took the time to back you up. _________________ Regards,
Mark
RVN 68-69
It's so nice to be insane
No one asks you to explain |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|