KeepItPrinting.com :: View topic - 4in dark background left side

Your business can be seen here! Prime spots available!

Please consider making a voluntary donation if you find these forums helpful. Thank you.

Home of the Kip Doctor! The VIP Code for new registrations is 8120.

KeepItPrinting.com
The "unofficial' and "unauthorized" KIP info site.

4in dark background left side

KeepItPrinting.com Forum Index -> General KIP Discussions

View previous topic :: View next topic

toddanderson
dreaming of medical school

Joined: 09 Jul 2008
Posts: 6

Posted: Wed Mar 10, 2010 9:07 pm Post subject: 4in dark background left side

I have a kip3000 that is giving me a dark background going lead to trail about 4" wide on internal prints. the machine only has 6000 feet I replaced the cleaning roller and pushed it against the drum I replaced both developer rollers and set the presure without the gear on Any help as I am running out of ideas

Zoey
resident

Joined: 15 Jan 2007
Posts: 232
Location: Midwest

Posted: Thu Mar 11, 2010 11:16 am Post subject:

I had this happen with a bad LED head. If you have another 3000 try swapping the LED head to see if that fixes your problem. Btw, my problem was a wide dark band, so I am not sure if this will help.

toddanderson
dreaming of medical school

Joined: 09 Jul 2008
Posts: 6

Posted: Thu Mar 11, 2010 12:21 pm Post subject: thanks you for reply

The led could be my problem I dont have one to switch.
it is shading background i can see the print, it really looked like the drum cleaning roller, but I replaced that and pushed it up.
is thier anyway to test a led ? I have not had a bad led before so I am not sure what that looks like when they go.

Thanks again for any help

Zoey wrote:

I had this happen with a bad LED head. If you have another 3000 try swapping the LED head to see if that fixes your problem. Btw, my problem was a wide dark band, so I am not sure if this will help.

GR81
doctor

Joined: 09 Sep 2005
Posts: 256
Location: MN

Posted: Thu Mar 11, 2010 1:56 pm Post subject:

Check the tention springs on the developer unit.

bogey0
medical school senior

Joined: 04 Aug 2009
Posts: 46

Posted: Sat Mar 13, 2010 10:22 am Post subject:

as Doc would say..."it's ALWAYS the dev unit". Sounds like a pressure issue.

Display posts from previous:

	KeepItPrinting.com Forum Index -> General KIP Discussions	All times are GMT - 3.5 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum