KeepItPrinting.com

Couple of question for you:

1. What length and width of paper does it happen on?

2. Does it change if you change the paper width?

3. Does it happen on bond, film, etc?

4. Is the transp ...

OK, against my better judgement, I ordered the latest E-prom from KIP. NOW my machine will warm up fine, BUT the feed motor in drawer 1 constantly fires on and off. Also, it doesn't recognize when a ...

Well, I use a very thick 100 micron wire, opposed to the flimsy 80 micron wire recommended by KIP.

I don't get too many E-51's on the K2000. or K6000's either. Just a thought.

OK, here's the fun. Paper feeds from drawer 2 all the way to the transfer/sep, then back completely out. THEN the machine tries to feed from drawer one (regardless of paper size), which in turn does ...

I used to have a big can of blue silicon brake grease. Worked like a champ in situations like this. You can get a high temp silicon grease at any auto parts store fairly cheap.

It likes to stick. Since it is near the fuser lamp, lube the bottom two gears along the chain path with a very heavy heat resistant lube. Try not to get anything that will run off the chain. I am s ...

One "tech tip" that I seem to remember working was taking the "L" shaped bracket out of the dev. unit. It was right under the toner hopper. That stopped the "tracks" for me.

I have a customer that during the winter months has a very dry condition. The vellums get too "static-y" and won't allow a good transfer. Any ideas??

Just a quick thought, however. Any chance you could create a forum for the analogs??? Yeah, I know, an analog? Well, my "training" on them was exactly this: "Here's the CD. You're trained." Anyw ...